Great Guide On How To Do Plumbing Right

Were you aware that you could get something as cheap and easy to install as a rubber blanket for your pipes in order to take care of that banging noise you hear in your house? Use this article for this and more great plumbing tips to help you today!

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

If your pipes are prone to freezing, let the water trickle continuously in at least one faucet during weather that is below freezing. This will minimize the chances that the pipes will freeze and leave you without water. If water is continually running through the pipes and trickling out of a faucet, the pipes are less likely to freeze.

To avoid having your outdoor faucets freeze up in the winter, detach all hoses before the first freeze. Also, close the shutoff valve that leads to the outdoor faucets, then turn on the outdoor faucets to let any remaining water in the lines drain. Once temperatures warm up in the spring, you can reverse the process.

Frozen and bursting pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don’t crack from the cold weather.

You can pour baking soda down a drain followed by some vinegar if you want to keep drains clear. This should be done once a month, and a cup each of baking soda and vinegar should be used. The combination will cause a chemical reaction, so just place a cloth or other object over the drain after pouring. Wait until the chemical reaction runs its course, then flush the pipes by pouring in a kettle full of boiling water. This process should open up the pipes by clearing out hair build-up and soap scum.

Do not overload your garbage disposal. If you need to dispose of large items, cut them up into smaller pieces. Also, do not put too much in at a time, put one or two items in and wait a few seconds to dispose of the rest. Overloading your disposal can cause the engine to overheat.

In conclusion, there is a lot that you can easily do in your own home when it comes to dealing with plumbing issues. Hopefully you learned a few things and will be able to act on them. Use this advice today and be confident in all of the plumbing work that you do.